Our Products

Our Newest Product: IsurGlide PLUS Hydrophilic Coating
Our Newest Product: IsurGlide PLUS Hydrophilic Coating

ISurGlide® Hydrophilic Coatings

Hydrophilic coatings for medical devices with easy dip application and UV cure technology – available in 1L bottles

PRODUCT INFO

Our Products

ISurGlide® Hydrophilic Coatings

Hydrophilic coatings for medical devices with easy dip application and UV cure technology – available in 1L bottles

PRODUCT INFO

PhotoPrime® Family of Primers

Priming the surface of medical devices to improve adhesion of hydrophilic coatings

PRODUCT INFO

PhotoPrime® Family of Primers

Priming the surface of medical devices to improve adhesion of hydrophilic coatings

PRODUCT INFO

Coating Process

ISurGlide Coating Solutions are formulated to adhere to medical device substrates and make them slippery.  They are applied in an easy dip procedure followed by a UV cure to bond the ISurGlide coating to the surface of your device.

Two coated PVC rods: The rod on the right is swollen with water, while the one on the left is dry

You can feel the difference the coating makes.

As the ISurGlide coating swells with water, increasing up to 3-10 times its size, the coating slides easily between your fingertips without sloughing off.

At ISurTec, we test lubricity by measuring the force required to pull a wet coating through silicone pads that pinch the coated device. A normal force is applied to the pads, and as the device is pulled up through the pinched pads, the friction force is measured. This test is an industry standard for simulating tissue contact. The coefficient of friction of a coating is one common measure of a coating’s lubricity. Testing a coating’s friction over multiple cycles of this pinch tests gives information on the coating’s durability. If the coating is not bonded well to a device, frictional forces increase rapidly.

The coefficient of friction (COF) is given by:

ISurGlide’s COF is consistently <0.05, usually 0.02 – 0.03.  An uncoated device has a COF > 1.0 typically. 

Coating Process

ISurGlide Coating Solutions are formulated to adhere to medical device substrates and make them slippery.  They are applied in an easy dip procedure followed by a UV cure to bond the ISurGlide coating to the surface of your device.

You can feel the difference the coating makes.

Two coated PVC rods: The rod on the right is swollen with water, while the one on the left is dry

As the ISurGlide coating swells with water, increasing up to 3-10 times its size, the coating slides easily between your fingertips without sloughing off.

At ISurTec, we test lubricity by measuring the force required to pull a wet coating through silicone pads that pinch the coated device. A normal force is applied to the pads, and as the device is pulled up through the pinched pads, the friction force is measured. This test is an industry standard for simulating tissue contact. The coefficient of friction of a coating is one common measure of a coating’s lubricity. Testing a coating’s friction over multiple cycles of this pinch tests gives information on the coating’s durability. If the coating is not bonded well to a device, frictional forces increase rapidly.

The coefficient of friction (COF) is given by:

ISurGlide’s COF is consistently <0.05, usually 0.02 – 0.03.  An uncoated device has a COF > 1.0 typically. 

Frequently Asked Questions

Hydrophilic coatings are common on medical devices. These coatings reduce procedure times by making it easier to thread a catheter through the vasculature during a minimally invasive surgery. Additionally, ISurGlide coatings reduce tissue damage during the passage of the device. These factors create better outcomes for the patient.

ISurGlide coatings are used on many types of medical devices including all varieties of catheters (PTCA, neurovascular, urinary, etc), guidewires, introducers and other single-use devices. In addition, ISurGlide coatings have been used in vitro on laboratory substrates, microfluidics, and other high-value non-medical applications.

Many major medical device manufacturers in the US, Europe, and South America use ISurGlide coatings for their hydrophilic devices. ISurTec signs non-disclosure agreements as part of its licensing business model, so we cannot reveal the names of our customers. However, ISurGlide has been used on FDA-approved devices since 2007.

ISurGlide coatings feel very slippery when wet and lower the coefficient of friction from >1.0 for most medical device materials to < 0.05. You will be able to feel the difference our lubricious coating makes.

ISurGlide coatings contain hydrogels – polymers that swell in water to many times their initial dry volume. With their high water content, hydrogels are similar to tissues in the body. The swollen hydrogel can release or reorient water when compressed, allowing it to slide through the vasculature more easily to limit tissue damage. ISurGlide coatings swell to 3-10 times their size when wet.

ISurGlide coatings range from 50 microns to less than 2 microns thick when hydrated. A typical coating is 5-10 microns thick when wet.

ISurGlide coatings can bond to most medical device substrates including PEBAX, nylon, PVC, polyurethanes, polyethylene, as well as other commonly used substrates like polystyrene, polypropylene, PET, and polycarbonates. With pre-treatment, ISurGlide coatings can also be applied to metals, ceramics, and glass. ISurGlide coatings crosslink and bond to almost any plastic containing carbon-hydrogen bonds. However, ISurGlide coatings cannot directly bond to polymers lacking C-H bonds, including entirely fluorinated substrates such as Teflon.

ISurGlide coatings are typically applied by a dip coating process followed by UV curing. The coating step can be incorporated into the customers in-line manufacturing or provided by a coating service company.

ISurTec provides research coating work on your medical device to demonstrate ISurGlide coatings but we do not provide coating services for human use.

ISurTec offers the PhotoPrime family of primers to address difficult-to-coat device substrates and geometries. Each device is different and ISurTec is happy to evaluate your device’s need for a primer before applying ISurGlide coatings.

The length of UV exposure is dependent on the intensity and wavelength of the UV light as well as the distance from the lamp to the device. These parameters need to be optimized for every unique device and coating machine. As a guideline, UV exposure lasts from 30 sec to 5 minutes UV cure time.

UV lamps should emit at wavelengths < 320 nm for the most efficient cure. Recommended UV lamps include broad-spectrum mercury metal halide lamps, single-wavelength fluorescent bulbs, and low-wavelength LEDs.

ISurGlide coating solutions are certified for use from 18 months to 2 years from the date of manufacture.

ISurGlide coating solutions are supplied in amber 1L bottles sealed with Teflon-coated lids. They can be stored at room temperature in ambient humidity conditions. ISurGlide coating solutions contain isopropanol and require flammable cabinets for safe storage.

ISurTec maintains an FDA masterfile on ISurGlide coatings and PhotoPrime primers. The FDA masterfile can be accessed by the FDA in support of licensed companies during the regulatory process.

ISurTec has tested ISurGlide coatings for biocompatibility per the short-term ISO 10993-1 biocompatibility panel including cytotoxicity, acute toxicity, irritation, sensitization, materials-mediated pyrogenicity and hemocompatibility. ISurGlide coatings were found biocompatible by this standard through testing at an external laboratory.

Upon contacting ISurTec, we will discuss your specific device needs with you. Depending on those needs, we will either offer to coat your device in-house to demonstrate ISurGlide coating or sell your company coating solution through a material transfer agreement. If the coating works well, a license/supplier agreement will be negotiated. ISurTec manufactures the coating solutions in house and will ship to your facility or to a coating service provider of your choice.

For further information, contact Patrick Guire at 651-209-9757 ext 11 or info@isurtec.com.

Frequently Asked Questions

Hydrophilic coatings are common on medical devices. These coatings reduce procedure times by making it easier to thread a catheter through the vasculature during a minimally invasive surgery. Additionally, ISurGlide coatings reduce tissue damage during the passage of the device. These factors create better outcomes for the patient.

ISurGlide coatings are used on many types of medical devices including all varieties of catheters (PTCA, neurovascular, urinary, etc), guidewires, introducers and other single-use devices. In addition, ISurGlide coatings have been used in vitro on laboratory substrates, microfluidics, and other high-value non-medical applications.

Many major medical device manufacturers in the US, Europe, and South America use ISurGlide coatings for their hydrophilic devices. ISurTec signs non-disclosure agreements as part of its licensing business model, so we cannot reveal the names of our customers. However, ISurGlide has been used on FDA-approved devices since 2007.

ISurGlide coatings feel very slippery when wet and lower the coefficient of friction from >1.0 for most medical device materials to < 0.05. You will be able to feel the difference our lubricious coating makes.

ISurGlide coatings contain hydrogels – polymers that swell in water to many times their initial dry volume. With their high water content, hydrogels are similar to tissues in the body. The swollen hydrogel can release or reorient water when compressed, allowing it to slide through the vasculature more easily to limit tissue damage. ISurGlide coatings swell to 3-10 times their size when wet.

ISurGlide coatings range from 50 microns to less than 2 microns thick when hydrated. A typical coating is 5-10 microns thick when wet.

ISurGlide coatings can bond to most medical device substrates including PEBAX, nylon, PVC, polyurethanes, polyethylene, as well as other commonly used substrates like polystyrene, polypropylene, PET, and polycarbonates. With pre-treatment, ISurGlide coatings can also be applied to metals, ceramics, and glass. ISurGlide coatings crosslink and bond to almost any plastic containing carbon-hydrogen bonds. However, ISurGlide coatings cannot directly bond to polymers lacking C-H bonds, including entirely fluorinated substrates such as Teflon.

ISurGlide coatings are typically applied by a dip coating process followed by UV curing. The coating step can be incorporated into the customers in-line manufacturing or provided by a coating service company.

ISurTec provides research coating work on your medical device to demonstrate ISurGlide coatings but we do not provide coating services for human use.

ISurTec offers the PhotoPrime family of primers to address difficult-to-coat device substrates and geometries. Each device is different and ISurTec is happy to evaluate your device’s need for a primer before applying ISurGlide coatings.

The length of UV exposure is dependent on the intensity and wavelength of the UV light as well as the distance from the lamp to the device. These parameters need to be optimized for every unique device and coating machine. As a guideline, UV exposure lasts from 30 sec to 5 minutes UV cure time.

UV lamps should emit at wavelengths < 320 nm for the most efficient cure. Recommended UV lamps include broad-spectrum mercury metal halide lamps, single-wavelength fluorescent bulbs, and low-wavelength LEDs.

ISurGlide coating solutions are certified for use from 18 months to 2 years from the date of manufacture.

ISurGlide coating solutions are supplied in amber 1L bottles sealed with Teflon-coated lids. They can be stored at room temperature in ambient humidity conditions. ISurGlide coating solutions contain isopropanol and require flammable cabinets for safe storage.

ISurTec maintains an FDA masterfile on ISurGlide coatings and PhotoPrime primers. The FDA masterfile can be accessed by the FDA in support of licensed companies during the regulatory process.

ISurTec has tested ISurGlide coatings for biocompatibility per the short-term ISO 10993-1 biocompatibility panel including cytotoxicity, acute toxicity, irritation, sensitization, materials-mediated pyrogenicity and hemocompatibility. ISurGlide coatings were found biocompatible by this standard through testing at an external laboratory.

Upon contacting ISurTec, we will discuss your specific device needs with you. Depending on those needs, we will either offer to coat your device in-house to demonstrate ISurGlide coating or sell your company coating solution through a material transfer agreement. If the coating works well, a license/supplier agreement will be negotiated. ISurTec manufactures the coating solutions in house and will ship to your facility or to a coating service provider of your choice.

For further information, contact Patrick Guire at 651-209-9757 ext 11 or info@isurtec.com.

ISurTec is a technology innovator with a deep passion for identifying, creating and commercializing new methods and products that enable companies to fulfill their mission.

CONTACT

Innovative Surface Technologies, Inc.
1045 Westgate Drive Suite 100
Saint Paul, MN 55114

651-209-9757

LEARN MORE

ISurTec will consistently provide high-quality products and services that meet requirements for scientific, medical device, and industrial coatings. We will actively strive to bring excellence to the surface in all that we do, meeting or exceeding customers’ needs and expectations, and improve the quality of our products and service by enabling each employee to fulfill their job responsibilities correctly the first time.
The following are trademarks of ISurTec: ISurTec®, ISurGlide®, ISurLite®, ISurTherm®, ISurCoat®, PhotoPrime®, ISurGuard™, ISurBlock™, ISurCell™. All rights are expressly reserved.